img
img
img
img
img
img
img

Polymer Processing Aid

Additive Masterbatches:

Polymer Processing Aid (PPA):

PPA (Polymer processing aid) masterbatches are designed to improve processes and production utilizing polyolefins and are generally used at levels of 400 to 1500 PPM. The use of PPA Masterbatches also enables good dispersion.

These Masterbatches are based on Fluoro-elastomers and are widely recommended for improving the processibility and clarity of polymers at higher shear rates. They are formulated to form a microscopic dispersed phase within the polymer carrier. During processing, the fluoropolymer gets coated on the die and the walls of the extruder. This results in reduction of melt fracture and, consequently, lesser extruder backpressure. Essentially, it reduces the friction between polymeric materials with screw, barrel & die.

To achieve the coating in a sufficiently quickly, the masterbatch is typically added at 1500 PPM initially and the rate can subsequently be reduced to 500 PPM or even 250 PPM as long as the effect continues to be evident.

PPA is generally used in:

  1. Polyethylene, typically with a melt flow index of less than or equal to one (LLDPE / HDPE &LDPE).
  2. Extrusion process where shear ratio is typically less than or equal to 200 per second (Blown film, Cast film, Extrusion blow molding, Monofilament, Pipe /Tubing & Wire & Cable).

Other advantages of PPA include:

      * Eliminates Die build up

      * Lowers the gel formation

      * Eliminates melt fracture

      * Gloss of the product will improve

      * High productivity

      * Reduces processing temperature

      * Even transparency

      * Improvement in get-up of LDPE/LLDPE Film also improve due to Processing additives

Polymer Process Aid Masterbatches offered by Sri Vasavi Pigments (P) Ltd.

Product Name / Code

Carrier Resin

Active Ingredient

Application

LDR

Advantages

PPA MB 01

PE

2%

PP Extrusion

600-1000 ppm in end application

  • Reduces melt fracture, die pressure
  • Improves surface appearance

PPA MB 02

PP

2%

PE Film

600-1000 ppm in end application

  • Reduces melt fracture, die pressure
  • Improves surface appearance

PPA MB 03

PE

2%

Wire and Cable

600-1000 ppm in end application

  • Reduces melt fracture, die pressure
  • Improves surface appearance

PPA MB 04

PE

3%

PE Film

600-1000 ppm in end application

  • Reduces melt fracture, die pressure
  • Improves surface appearance

PPA MB 05

PE

5%

High-quality Film line

600-1000 ppm in end application

  • Reduces melt fracture, die pressure
  • Improves surface appearance

PPM Calculations 

Active Content

300 ppm

500 ppm

600 ppm

800 ppm

1000 ppm

2%

1.5%

2.5%

3.0%

4.0%

5.0%

3%

1.0%

1.67%

2.0%

2.67%

3.33%

5%

0.6%

1.0%

1.2%

1.6%

2.0%